Care and Maintenance
Looking after your TECHNOMARINE
As with all quality watches, your TechnoMarine needs to be carefully looked after. Some basic recommendations can help you preserve its reliability and appearance over time:
You should regularly rinse your watch in clean water and soap, especially after using it in saltwater. For frequent or prolonged periods underwater, we recommend that you use a silicone, steel or gold strap. We remind you that your watch is only waterproof if the crown is pushed down and screwed.
In the case of sharp changes in temperature, a light condensation may appear under the glass of your watch. This steam will disappear on its own and will not affect the functioning of your watch. If condensation persists, please consult your TecnhoMarine retailer.
With time, the seals of your watch can be subject to damage. We recommend that you have the water tightness of your watch checked once a year by your TechnoMarine retailer. If necessary, this can lead to replacement of the seals.
The glass in your watch is covered with a double anti-reflective treatment (internal and external) in order to optimise visibility. This thin sensitive layer can get damaged after a shock or bad treatment. You will be completely satisfied by this coating when it is used in normal conditions.
Our leather and alligator straps are made with top quality skins, specially treated to resist humidity. Being such noble and delicate materials, we advise that you limit using them in water. When looking after your leather and alligator straps, we recommend that you clean them with a dry cotton cloth and to not use any abrasive products.
It is normal for leather and alligator to lightly darken over time. These materials are exclusively sourced from farmed animals and customs certificates certify their origin.
All ceramic watches and elements at TechnoMarine are made by a process of injection at high temperature, as the method is the most qualitative and resistant for treating the ceramic.
Your watch is protected by the TechnoMarine warranty for a period of two years from the date of purchase. The TechnoMarine warranty covers all material and manufacturing defects during this period. The warranty is only valid if the retailer has completed the warranty card with: date of purchase, reference number, serial number, and retailer’s name, address and phone number.
In addition, the serial number must be clearly legible on the watch. If your TechnoMarine watch needs repairs, please bring your watch to an authorized TechnoMarine retailer or TechnoMarine repair center. These locations can be found by visiting here.
This warranty does not cover:
- Watchband, glass or battery
- Surface treatment or coatings (such as PVD) Lost elements (such as screws, diamonds)
- Normal wear-and-tear and aging (such as scratches on glass, or color and material alterations)
- Any damage, on any part of the watch, resulting from lack of care, negligence, or disregard of the directions
for use provided by TechnoMarine - Water in filtration due to failure to completely screw down the crown (if applicable), or due to the use of the push buttons or the crown under water
- Any work or modification performed on the watch by persons unauthorized by TechnoMarine
Any further claim against TechnoMarine for damages, beyond those specified in this warranty, is totally excluded, excepting mandatory statutory rights the purchaser may have against the manufacturer. The above manufacturer’s warranty is independent of any warranty that may be provided by there tailer, for which the retailer carries the sole responsibility.